Description The most environmentally safe way to save time and money on your screen reclaiming. Easiway dip tank users reduce chemical consumption by up to 70%, decreasing labour needs by up to 50%! Add chemical at 1:7 ratio with water. For the PT-520 dip tank we recommend 5 gallons of EasiStrip SUPRA One Step Ink Cleaner and Emulsion Remover and up to 32 gallons of water (leaving approximately 6-10 inches from the top of the tank for the water to fluctuate when you dip your screens). ** This tank is ideal for small to medium-sized businesses/automatic screen users. This tank will hold 3-4 screens. Included in package: 1 37 gallon Diptank 1 x 5 Gallon Easiway Supra 1 x 5 Ltr 701n Stain and Haze Remover 1 x 5 Ltr 842 Screen and Ink 1 x Blue Cleaning Brush 1 x Red Cleaning pad and Handle Tank Includes: Dip Tank Lid/Cover Tank Brace Hold Down Rods Tank Dimensions: Volume: 37 Gallons Outside Tank Dimensions without lid: 33″ W x 11.5″ D x 37″ H Inside Dimensions: 28.75″ W x 7.5″ D x 35.5″ H Inside Lip: 2″ Weight: 40.0 lbs Diptank instructions: Scrape as much ink off of your screen as possible Place the screen in your dip tank and let it soak for roughly 2-3 minutes Pull the screen out of the dip tank and allow excess fluid to drain back into the tank Bring your screen to your washout booth High Pressure rinse emulsion off of the screen Apply EasiSolv 701 Screen Wash & Stain Remover (with Degreasers) to both sides of your screen and scrub High pressure rinse the excess ink and stains from your screen Low pressure/flood rinse your screen to remove any excess chemical from the mesh Dry your screen – it will then be ready for reuse More information. If you would like more information then please give us a call on 0044 (0) 1562 829009 or use our Webchat or Email You can find all SDS and TDS in our resources section
