Van Mark Trim-A-Slitter Perf Combo (SCI24HD) Call for 15% off

The Van Mark Trim-A-Slitter Perf Combo SCI24HD is designed to slit, stiffen, or perforate roofing steel, aluminum, zinc, or copper. This system comes with 4 knives that allow two cuts with each pass, as well as a perforator die set that allows for perforation. SCI24HD has an adjustable folding feed trade guides with aluminum rollers to ensure that varying widths of metal are quickly squared up for accurate slitting, rib-forming, or perforating. This slitter designed by Van Mark adds rigidity to your metal with a slightly raised rib and add a decorative shadow line to wider fascia and frieze board. Features: Hardened steel, double sided slitting knives for long trouble-free service life Precision ground & Polished knives provides clean burr-free edges in all types of material Anodized aluminum construction stands up to the rigors of all job site weather conditions Easy to set up and use knives for slitting, rib forming, and optional perforators re position in seconds The Built-In Tape Rule helps maintain slitter knife orientation with material Heavy Duty, High Torque 110v reversible motor comes complete with motor mounted on/off switch Brass tipped set screws – Soft brass tips ensure secure position of slitting knives without damage to knives and arbor shaft The perforating die set perforates steel, aluminum, zinc, and copper by producing a lanced perforation allowing 3.3″² of net free area, per running foot of metal Portable, and easily setup for jobsite use or easily removed from stand for use on a larger production table Make your own perforated z-bar, Ridge caps and soffits onsite or in the shop Kit Contents 1 Slitter 1 Heavy Duty Motor 1 Stand 4 Knives Heavy Duty perforating die set Specifications Length: 24 in. (of the slitter) Arbor Size: 2 in. Weight: 188 lbs. Slitting Capacities: Material / Maximum Thickness Aluminum / .040″ (1.0 mm) slitting, .032″ (0.8 mm) and perforating Galvanized Steel / 24 ga. (0.6 mm) Painted Steel (Grade D) / 24 ga. (0.6 mm) Roofing Copper /24 oz. Zinc / .040″ (1.0 mm) Features: Hardened steel, double sided slitting knives for long trouble-free service life Precision ground & Polished knives provides clean burr-free edges in all types of material Anodized aluminum construction stands up to the rigors of all job site weather conditions Easy to set up and use knives for slitting, rib forming, and optional perforators re position in seconds The Built-In Tape Rule helps maintain slitter knife orientation with material Heavy Duty, High Torque 110v reversible motor comes complete with motor mounted on/off switch Brass tipped set screws – Soft brass tips ensure secure position of slitting knives without damage to knives and arbor shaft The perforating die set perforates steel, aluminum, zinc, and copper by producing a lanced perforation allowing 3.3″² of net free area, per running foot of metal Portable, and easily setup for jobsite use or easily removed from stand for use on a larger production table Make your own perforated z-bar, Ridge caps and soffits onsite or in the shop Kit Contents 1 Slitter 1 Heavy Duty Motor 1 Stand 4 Knives Heavy Duty perforating die set Specifications Length: 24 in. (of the slitter) Arbor Size: 2 in. Weight: 188 lbs. Slitting Capacities: Material / Maximum Thickness Aluminum / .040″ (1.0 mm) slitting, .032″ (0.8 mm) and perforating Galvanized Steel / 24 ga. (0.6 mm) Painted Steel (Grade D) / 24 ga. (0.6 mm) Roofing Copper /24 oz. Zinc / .040″ (1.0 mm)