Plastica 500g Relax Spa Stabilised Chlorine Granules

Transform your pool or spa into a haven of crystal-clear water with our top-rated chlorine granules. Dive into the world of safe and bacteria-free aquatic bliss, thanks to the powerful sanitizing properties of our granular chlorine. Keep your pool or spa in pristine condition by applying our chlorine granules regularly. Achieve the perfect free chlorine levels effortlessly, with the recommended range of 3-5 mg/l (ppm) for hot tubs and 1-3 mg/l (ppm) for swimming pools. Our granules are designed for rapid dissolution, ensuring quick results without compromising longevity. Say goodbye to pH level concerns as our granules have minimal impact on water pH, making maintenance a breeze. Key Features: Experience the convenience of granular chlorine that maintains water pH levels effectively. Our stabilized chlorine granules are your go-to solution for consistent dosing, ensuring the production of free active chlorine that effectively eliminates bacteria and other harmful organisms in your pool or spa. Application Instructions: 1. Start by maintaining the pH level within the optimal range of 7.2 ? 7.6. For adjustments outside this range, consider using our pH plus or minus products for best results. 2. Keep free chlorine residuals in spas between 3-5 mg/l (ppm) and for swimming pools between 1-3 mg/l (ppm). For newly filled spas, administer an initial shock or start-up dose of chlorine at 50 mg/l (ppm) for 1 hour or 20 mg/l (ppm) for 2 hours. 3. To apply the product, ensure that pool or spa temperatures are above 20 degrees C. For lower temperatures, pre-dissolve the granules in a clean plastic container at a maximum rate of 10g per 0.2 gallons (1ltr) of water. Thoroughly mix to dissolve completely and add the solution to the pool or spa while the pumps are operational. 4. Repeat dosing as needed to reach the desired chlorine levels. 5. As a maintenance practice, consider shock dosing your spa periodically, especially after heavy use, to eliminate any excess contamination effectively. Dose Rates: – Medium hot tub (1,000 liters / 220 gallons): 2g to raise chlorine by 1 mg/l (ppm) or 6g to increase by 3 mg/l (ppm) – Large hot tub (1,500 liters / 330 gallons): 3g for 1 mg/l (ppm) increase or 9g for 3 mg/l (ppm) increase – Small pool (40,000 liters): 80g to elevate chlorine by 1 mg/l (ppm) or 240g for a 3 mg/l (ppm) rise – Medium pool (60,000 liters): 120g for 1 mg/l (ppm) increase or 360g for 3 mg/l (ppm) increase – Large pool (80,000 liters): 160g to boost chlorine by 1 mg/l (ppm) or 480g for a 3 mg/l (ppm) surge Enhance your aquatic experience with our premium chlorine granules, the trusted choice for maintaining a safe, clean, and inviting pool or spa environment. Dive into the luxury of pristine water with ease and confidence, knowing that our high-quality chlorine granules have got you covered every step of the way. Manufacturers description: These chlorine granules are one of the most popular products for ensuring pool and spa water is safe and bacteria free. Apply regularly to achieve the recommended free chlorine level of 3-5 mg/l (ppm) for hot tubs or 1-3 mg/l (ppm) for swimming pools. These granules are rapid dissolving, long lasting and have little effect on the pH of the water.  They are suitable for shock dosing small above ground pools.  You can find dosing amounts below. Key Features Granular chlorine has little effect on the pH level of the water. These stabilised chlorine granules are ideal for regular dosing of your swimming pool or spa, to produce free active chlorine which kills bacteria and other potentially harmful organisms. Application Instructions 1. Maintain pH level within the ideal range of 7.2 – 7.6. If outside this range please use our PH plus or PH minus products to adjust for the best results. 2. Maintain free chlorine residuals for spas within the range 3 – 5mg/l (ppm).  For swimming pools it should be 1 – 3mg/l (ppm). Freshly filled spas require an initial shock or start up dose of chlorine: 50mg/l (ppm) for 1 hour or 20mg/l (ppm) for 2 hours. 3. This product may be applied directly to pools or spas where temperatures exceed 20  degrees C. If below this temperature or in doubt it is recommended to pre-dissolve in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1ltr) in water. Stir well to ensure product is fully dissolved. Add the resulting solution to the spa or pool whilst the pumps are turned ‘on’. 4. Repeat dose application if necessary to achieve the required levels. 5. It is recommended that you periodically (e.g. weekly or after heavy spa use) shock dose your spa to eliminate any excess contamination. Dose Rates Medium hot tub 1,000 litre (220 Gallons) of water requires 2g to increase the chlorine level by 1mg/l (ppm) or 6g to increase chlorine level by 3mg/l(ppm) Large hot tub 1,500 litre (330 Gallons) of water requires 3g to increase the chlorine level by 1mg/l (ppm) or 9g to increase chlorine level by 3mg/l(ppm) Small pool 40,000 litres of water requires 80g to increase the chlorine level by 1mg/l (ppm) or 240g to increase chlorine level by 3mg/l(ppm) Medium pool 60,000 litres of water requires 120g to increase the chlorine level by 1mg/l (ppm) or 360g to increase chlorine level by 3mg/l(ppm) Large pool 80,000 litres of water requires 160g to increase the chlorine level by 1mg/l (ppm) or 480g to increase chlorine level by 3mg/l(ppm)   Stock note: In an effort to provide the quickest possible delivery for our customers we may ship an alternative premium branded product if stocks are low.? These brands will only be Blue Horizons, Deep Blue Pro, Relax or Swim Fresh, all established for a long time in the water treatment industry.